Brother DCP-340CW Network User's Manual page 35

Configuring your machine for a wireless network
• If you are using Personal Firewall software (e.g. the Internet Connection Firewall available in
®
Windows XP), disable it. Once you are sure that you can print, re-start your Personal Firewall
software.
• Node name: Node name appears in current BRAdmin Professional window. The default Node name
is "BRW_xxxxxx" ("xxxxxx" is the last six digits of Ethernet address.).
1
Start the BRAdmin Professional utility (from Windows
Programs / Brother Administrator Utilities / Brother BRAdmin Professional Utilities / BRAdmin
Professional.
Note
• If the print server is set to its factory default settings without using a DHCP/BOOTP/RARP server, the
device will appear as APIPA in the BRAdmin Professional utility screen.
• You can find the node name and Ethernet address (Node Address above) by printing out the Network
Configuration List. See Printing the Network Configuration List on page 4-27 for information on how to
print the Network Configuration List on your print server.
2
Select TCP/IP in the left frame of the main BRAdmin window.
3
Select the print server which you want to configure, in the right frame of the main BRAdmin window.
4
Select Configure Wireless Setting from the Control menu.
5
Enter a password if you have set it.
Note
By default, no password is required to change the print server settings. You can set a password to change
the print server settings. Double click the device you want to set a password. Click Control tab, and then click
Change Password. Enter the new password.
6
You can now change the print server settings.
®
98/98SE/Me/2000/XP), by clicking Start /
3
3 - 14