Control panel setup
Auto
Automatically uses a DHCP request to determine the IP addresses for the primary and secondary WINS
servers. You must set the BOOT Method to Auto for this feature to work.
Static
Uses a specified IP address for the primary and secondary WINS servers.
7.WINS Server
(For DCP-340CW)
1
Press Menu.
2
Press
or
to select 3.LAN.
▲
▼
Press Set.
3
(For Wired) Press
▲
(For Wireless) Press
Press Set.
4
Press
▲
or
▼
to select 7.WINS Server.
Press Set.
5
Press
or
to select Primary or Secondary.
▲
▼
Press Set.
6
Press
▲
repeatedly to enter the first three-digit number for the WINS Server address.
Press Set.
Repeat this step until you have entered the fourth three-digit number to complete the WINS Server
address.
Note
Each number can also be increased / decreased by holding down
7
Press Stop/Exit.
(For MFC-640CW)
1
(For Wired) Press Menu/Set, 5, 1, 7.
(For Wireless) Press Menu/Set, 5, 2, 7.
2
Press
▲
or
▼
to select Primary or Secondary.
or
▼
to select 1.TCP/IP(Wired).
or
to select 2.TCP/IP(WLAN).
▲
▼
▲
or
▼
.
4
4 - 12