Control panel setup
5
If you change the current setting, select 1 to reboot the machine.
If you do not change the current setting, select 2 to exit the menu.
Printing the Network Configuration List
Note
Node name: Node name appears in the Network Configuration List. The default Node name is "BRN_xxxxxx"
for a wired network or "BRW_xxxxxx" for a wireless network ("xxxxxx" is the last six digits of Ethernet
address.).
The Network Configuration List prints a report listing all the current network configuration including the
network print server settings.
(For DCP-340CW)
1
Press Menu.
2
Press
▲
or
▼
to select 4.Print Reports.
Press Set.
3
Press
or
to select 3.Network Config.
▲
▼
Press Set.
4
Press Mono Start or Color Start.
5
Press Stop/Exit.
(For MFC-640CW)
1
Press Menu/Set, 6, 6.
2
Press Mono Start or Colour Start.
3
Press Stop/Exit.
4
4 - 27