Brother DCP-340CW Network User's Manual page 118
Multi-protocol on-board ethernet multi-function print server and wireless (ieee 802.11b/g) ethernet multi-function print server
Hide thumbs
Also See for DCP-340CW:
- Quick setup manual (43 pages) ,
- Service manual (407 pages) ,
- User manual (112 pages)
Table of Contents
Advertisement
Wireless installation for Windows
12
If more than one wireless machine is available on
the network, the following list appears. If the list is
blank, check if the machine is powered on, and then
click Refresh. Choose the machine you wish to
configure, and click Next.
Note
The Default Node name of the NC-xxxx (where "xxxx" is your model name) is "BRW_xxxxxx" (where "xxxxxx"
is the last six digits of Ethernet address).
13
The wizard will search for wireless networks
available from your machine. If more than one
wireless network is available, the following list
appears. Choose the Ad-hoc network you wish to
associate the machine with, and then click Next.
If no Ad-hoc wireless network are available, you
need to create a new wireless network. Go to step
16.
Note
•
If your target Ad-hoc network does not appear on
the list, you can manually add it by clicking the
Add button. Follow the on-screen instructions for
entering the Name (SSID) and the Channel
number.
•
If the list is blank, check if the machine is within
range for wireless communication. Then, click
Refresh.
®
8
8 - 36
Advertisement
Table of Contents
Troubleshooting
