Wireless Installation For Macintosh; Installation Using A Wireless Computer In Infrastructure Mode For Mac Os; 10.2.4 Or Greater - Brother DCP-340CW Network User's Manual
Multi-protocol on-board ethernet multi-function print server and wireless (ieee 802.11b/g) ethernet multi-function print server
Hide thumbs
Also See for DCP-340CW:
- Quick setup manual (43 pages) ,
- Service manual (407 pages) ,
- User manual (112 pages)
Table of Contents
Advertisement
9
Wireless installation for Macintosh
Installation using a wireless computer in Infrastructure mode
®
for Mac OS
X 10.2.4 or greater
Important
If you have previously configured the wireless settings of the machine, you must reset the network LAN
settings before you can configure the wireless settings again.
For DCP-340CW: Press Menu,
change. The machine will restart automatically.
For MFC-640CW: Press Menu/Set, 5, 0, 1 and then press 1.Yes to accept the change. The machine will
restart automatically.
For MFC-820CW: Press Menu,
press OK. Press 1 to accept the change. The machine will restart automatically.
1
Turn on the machine by plugging in the power cord.
2
Turn on your Macintosh
3
Put the supplied CD-ROM into your CD-ROM drive.
4
Double-click the Start Here OSX icon to install
drivers and MFL-Pro Suite. If the language screen
appears, choose your language.
▲
or
▼
to choose 3, 0 and choose Reset. Press
for LAN and press OK. Press
or
▲
▼
®
.
®
▲
for Yes to accept the
for Factory Reset and then
or
▲
▼
9
9 - 1
Advertisement
Table of Contents
Troubleshooting
