Brother DCP-340CW Network User's Manual page 140
Multi-protocol on-board ethernet multi-function print server and wireless (ieee 802.11b/g) ethernet multi-function print server
Hide thumbs
Also See for DCP-340CW:
- Quick setup manual (43 pages) ,
- Service manual (407 pages) ,
- User manual (112 pages)
Table of Contents
Advertisement
Wireless installation for Macintosh
12
Follow the on-screen instructions to complete the
setup by the control panel. See Using the Setup
Wizard from the control panel LAN menu for a
wireless network on page 3-3. When finished, go to
the driver installation in step 20.
13
If more than one wireless machine is available on
the network, the following list appears. If the list is
blank, check that the access point and the machine
are powered on, and then click Refresh. Choose the
machine you wish to configure, and click Next.
Note
The Default Node name of the NC-xxxx (where "xxxx" is your model name) is "BRW_xxxxxx" or
"BRN_xxxxxx" (where "xxxxxx" is the last six digits of Ethernet address).
14
The wizard will search for wireless networks
available from your machine. If more than one
wireless network is available, the following list
appears. Choose the access point you wish to
associate the machine with, and then click Next.
®
9
9 - 18
Advertisement
Table of Contents
Troubleshooting
