Brother DCP-340CW Network User's Manual page 76
Multi-protocol on-board ethernet multi-function print server and wireless (ieee 802.11b/g) ethernet multi-function print server
Hide thumbs
Also See for DCP-340CW:
- Quick setup manual (43 pages) ,
- Service manual (407 pages) ,
- User manual (112 pages)
Table of Contents
Advertisement
Troubleshooting
®
For Macintosh
®
For Mac OS
9.1 to 9.2 (for the wired network connection only)
(1) From the Apple menu, open the Chooser.
(2) Click the Brother Ink (IP) icon, and make sure that your print server name appears in the right frame.
If it is visible, then the connection is good. Otherwise, go to Step 5.
®
For Mac OS
X 10.2.4 or greater
(1) From the Go menu, select Applications.
(2) Open the Utilities folder.
(3) Double click the Printer Setup Utility icon.
(4) Click Add.
(For Mac OS X 10.2.4 to 10.3) Go to (5).
(For Mac OS X 10.4) Go to (6).
(5) (For Mac OS X 10.2.4 to 10.3) Make the following selection.
(6) Make sure that your print server appears. If it is visible, then the connection is good. Otherwise, go
to Step 5.
5
If you have tried 1 to 4 above and it does not work, then reset the print server back to the default factory
settings and try from the initial setup again. For information how to reset to the default factory settings,
see Restoring the network settings to factory default on page 4-28.
7
7 - 3
Advertisement
Table of Contents
Troubleshooting
