Brother DCP-340CW Network User's Manual page 126
Multi-protocol on-board ethernet multi-function print server and wireless (ieee 802.11b/g) ethernet multi-function print server
Hide thumbs
Also See for DCP-340CW:
- Quick setup manual (43 pages) ,
- Service manual (407 pages) ,
- User manual (112 pages)
Table of Contents
Advertisement
Wireless installation for Macintosh
When the following screen appears, open the
scanner cover to its open position. Insert the network
cable to your access point (hub or router) and then
to the machine. You will find the LAN socket above
and to the left of the ink cartridge slots, as shown.
Click Next and go to step 14.
Note
If you do not have a network cable, check I don't have a
network cable and click Next. You will need to configure
the wireless settings from the control panel. Follow the
onscreen instruction to complete the setup. When the
setup is finished, go to step 23 for driver installation.
11
(Continued from step 9) If you choose This PC has
wireless capability., check I am using an access
point in infrastructure mode, and then click Next.
®
9
9 - 4
Advertisement
Table of Contents
Troubleshooting
