Brother DCP-340CW Network User's Manual page 31

Configuring your machine for a wireless network
11
Select the Encryption type, None or WEP using
If you select None, go to Step 17.
If you select WEP, go to Step 12.
12
Select the key option; KEY1, KEY2, KEY3, KEY4 using
If you select the key which shows **********, go to Step 14.
If you select a blank key, go to Step 15.
13
Enter a new WPA key. Press OK. Go to Step 17.
14
If you want to change the key you selected in Step 12, press
Press OK. Go to Step 15.
If you want to keep the key you selected in Step 12, press
Press OK. Go to Step 16.
15
Enter a new WEP key. Press OK. Go to Step 17.
16
The following will be displayed.
17
To apply the settings, press 1 to select Yes. To cancel, press 2 to select No.
If you select 1 for Yes, go to Step 18.
If you select 2 for No, go back to Step 5.
18
The machine will connect to the wireless device you specified.
19
If your wireless network is connected successfully, the display shows Connected for 2 seconds and
configuration is completed.
If the connection failed, the display shows Connection Error for 2 seconds. See Wireless network
troubleshooting on page 7-8.
▲ or ▼ , and press OK.
▲ or ▼ , and press OK.
to select Change.
or
▲ ▼
to select Keep.
▲ or ▼
3
3 - 10