Wireless installation for Windows
If you are using a wired computer, choose This PC
uses a network cable to connect to the wireless
network., and you must configure the wireless
settings from the control panel. Click Next and follow
the on-screen instructions to complete the setup.
See Using the Setup Wizard from the control panel
LAN menu for a wireless network on page 3-3. When
finished, go to the driver installation in Step 19.
10
Read the Important Notice.
For DCP-340CW: Press Menu,
6, and choose WLAN. Press Menu. If Reboot OK? is
displayed, press
▲
interface will become inactive with this setting. The
machine will restart automatically. After it restarts,
check the box on the screen and click Next.
For MFC-640CW: Press Menu/Set, 5, 6, and then
press
▲
or
▼
to choose WLAN. Press Menu/Set. If
Reboot OK? is displayed, press 1.Yes. The wired
network interface will become inactive with this
setting. The machine will restart automatically. After
it restarts, check the box on the screen and click
Next.
For MFC-820CW: On the cotrol panel, press Menu.
for LAN and press OK. Press
Press
▲
or
▼
WLAN and press OK. If Reboot OK? is displayed, press 1 for Yes. The wired network interface will
become inactive with this setting. The machine will restart automatically. After it restarts, check the box
on the screen and click Next.
If Accepted is displayed, press Stop/Exit. Check the box and click Next.
Note
It will take approximately one minute for the LAN menu on the LCD to become available after the machine
restarts or is turned on.
®
▲
or
▼
to choose 3,
for Yes. The wired network
▲
for Network I/F and press OK. Press
or
▼
8
▲
or
▼
for
8 - 34