Brother DCP-340CW Network User's Manual page 120

Wireless installation for Windows
17
Click Next. The settings will be sent to your
machine. The settings will remain unchanged if you
click Cancel.
Note
If you want to manually enter the IP address settings of your machine, click Change IP Address and enter
the necessary IP address settings for your network. After making your selection, click Next and the Wizard
will search for available wireless networks.
18
To communicate with the configured wireless
device, you must configure your PC to use same
wireless settings. Manually change the wireless
settings on your PC to match the machine's wireless
settings shown on this screen. Click Next.
(The settings shown on this screen are for example
only. Your settings will not be the same.)
You have completed the wireless setup. A four level indicator of your machine's LCD
represents the wireless signal strength. If you chose to install the drivers in Step 6,
go to step 19.
19
The driver installation starts. After reading and
accepting the ScanSoft
Agreement, click Yes.
(Not available if you chose Driver Install Only in
Step 6.)
®
® ®
PaperPort 9.0SE License
8
8 - 38