Brother DCP-340CW Network User's Manual page 30

Configuring your machine for a wireless network
16
If your wireless network is connected successfully, the display shows Connected for 2 seconds and
configuration is completed.
Connected
If the connection failed, the display shows Connection Error for 2 seconds. See Wireless network
troubleshooting on page 7-8.
(For MFC-820CW)
1
Press Menu.
2
to select LAN.
Press ▲ or ▼
Press OK.
3
to select Setup WLAN.
Press ▲ or ▼
Press OK.
4
to select Setup Wizard.
Press or
▲ ▼
Press OK.
5
The machine will search for a wireless network name (SSID) around the machine.
6
After a few seconds, you can select the SSID from the list using
If you select the SSID displayed, go to Step 11.
If you want to add a new SSID, go to Step 7.
7
Select <New SSID> using
Press OK.
8
Enter the SSID. (For further information on entering text, see Entering Text (for MFC-640CW and
MFC-820CW) on page B-10.)
Press OK.
9
, select Infrastructure when instructed.
Using or
▲ ▼
Press OK.
If you select Ad-hoc, go to Step 11.
10
Select the Authentication method using
If you select Open System, go to Step 11.
If you select Shared Key, go to Step 12.
If you select WPA-PSK, go to Step 13.
▲ or ▼ .
▲ or ▼ , and press OK.
▲ or ▼ . Press OK to select the SSID.
3
3 - 9