Brother DCP-340CW Network User's Manual page 109

Wireless installation for Windows
10
Refer to the instruction manual that came with your access point to set the SecureEasySetup
of your access point.
11
Put the machine in SecureEasySetup
For DCP-340CW: Press
For MFC-640CW: Press Menu/Set, 5, 3, 2 on the control panel.
For MFC-820CW: Press Menu,
press OK. Press ▲
Note
It will take approximately one minute for the LAN menu on the LCD to become available after the machine
restarts or is turned on.
12
Press Menu/Set.
Note
If the LCD shows Connection Error, please try again.
13
Click Next.
14
The configuration is finished. Relocate the machine to a location that is within range of your access point.
You have completed the wireless setup. A four level indicator of your machine's LCD
represents the wireless signal strength. If you chose to install the drivers in Step 6,
go to step 15.
®
TM
mode.
▲ or ▼ to choose 3, 3, 2 on the control panel
for LAN and press OK. Press
▲ or ▼
for SecureEasySetup and press OK.
or ▼
for Setup WLAN and then
▲ or ▼
TM
mode
8
8 - 27