Dimm - NEC Express5800/B120b User Manual

9-14 Upgrading Your Server

DIMM

The DIMM (Dual Inline Memory Module) is inserted into the DIMM socket on the CPU blade. The
CPU blade includes eight DIMM sockets.
IMPORTANT:
The DIMM is easily affected by static electricity. Handle the DIMM
after making your body contact with a metallic frame section of the
server to discharge the static electricity on your body. Do not make
bare hands contact with terminals and components on the DIMM. In
addition, do not put the DIMM on a desk directly. See "Static
Precautions" for details of the static electricity.
Do not use any DIMM not approved by NEC. If an unapproved
third party's DIMM is installed in the server, not only the DIMM but
also the CPU blade may be defected. You will be charged by any
repair of a malfunction or defect caused by such a device within the
warranty period.
DIMM slot (CPU1) (CPU1_DIMM1 to CPU1_DIMM4 from top)
NOTES:
Up to 128GB memory can be added.
In the normal state, the CPU blade does not contain memory. The
memory is a required option.
DIMM slot (CPU2) (CPU2_DIMM1 to CPU2_DIMM4 from bottom)
CPU blade