9-16 Upgrading Your Server
Installation
Install the DIMM on the CPU blade depending on the following procedure:
1.
After the shutdown processing for the CPU blade to be removed, turn off the power of the
CPU blade.
2.
Pull out the CPU blade from the Blade Enclosure.
Refer to the User's Guide of the Blade Enclosure.
3.
Place the CPU blade on anti-static sheet with little dust.
4.
Remove the two screws fixing the top cover.
5.
Firmly hold the cover, move it slightly toward the rear of the CPU Blade, then lift it to
remove from the CPU blade.
IMPORTANT:
component on the CPU blade.
Pay attention not to make the cover hit any electronic