Table of Contents
Advertisement
LSI Software Configuration Utility
The configuration tool used for N8403-027 SATA interface card / N8403-026 RAID controller is
"LSI Software Configuration Utility".
NOTE:
remote console feature of NEC ESMPRO Manager.
Running the Utility
1.
When the following screen appears after you have powered on the CPU blade, press Esc.
The POST screen appears.
2.
Check the description as shown below on the POST screen, then press Ctrl + M.
Press <Ctrl><M> or Enter to Run LSI Software Configuration Utility
LSI Software Configuration Utility starts, and its TOP Menu appears.
See "Menu Tree" and "Operating Procedures for Setup Utility" described later for setup and
operation of disk array.
The LSI Software Configuration Utility cannot be used on
LSI Software Configuration Utility TOP Menu
(Management Menu)
LSI Sofotware RAID Configuration Utility Ver xxx XXXXXXXXX
Use Cursor Keys To Navigate Between Items And Press Enter To Select An Option
Configuring Your Server 4-29
Configure VD(s)
Advertisement
Table of Contents
