4-28 Configuring Your Server
Configuration by N8403-027 SATA Interface Card
This section describes how to use the internal hard disk drives as RAID System by N8403-027
SATA Interface card.
Installing the Hard Disk Drives
Install two hard disk drives to your CPU blade. See Chapter 9 for detail.
IMPORTANT:
addition, use two hard disk drives of the same capacity if you are going
to configure RAID1.
Enabling RAID Feature
You can use the two hard disk drives as a single disk drive or RAID drives. To configure a hard disk
drive as RAID drive, run SETUP utility and select [Advanced] - [PCI Configuration] - [Onboard
SCSI] - [Option Rom] - [Enabled]. See Chapter 4 for details.
NOTE:
drive.
Use two hard disk drives of the same revolution. In
The factory-set value is to use the hard disk drive as a RAID