Table of Contents
Advertisement
9-28 Upgrading Your Server
7.
Remove the four screws from the HDD bracket.
8.
Firmly hold the bracket knob, move the bracket slightly toward the rear of the blade, then
lift the bracket to remove it from the CPU blade.
IMPORTANT:
Pay attention not to make the bracket hit any electronic component
on the CPU blade.
Do not make your body contact with the terminals on the hard disk
drive or on the backplane. Some malfunction may occur if the hard
disk drive or backplane is installed or removed with dirt and/or oil
adhering to the terminals.
Pay attention not to be injured with terminals on the hard disk drive
or on the backplane.
9.
Remove the four screws from the interface card for hard disk drive.
10.
Remove the interface card for hard disk drive.
Pull up the interface card perpendicular to the CPU blade.
Advertisement
Table of Contents
