Table of Contents
Advertisement
B-32 Installing the Operating System
11.
When the following message is shown, press Enter to start "Welcome to Setup".
12.
When the installation of Windows Server 2003 has finished, the system reboots
automatically.
13.
When Windows Server 2003 R2 has been installed, the [Windows Setup] screen will be
displayed after logged on to the system.
IMPORTANT:
displayed.
Be sure to install Microsoft Windows Server 2003 R2 DISC 2
according to the following procedures.
14.
Insert Microsoft Windows Server 2003 R2 DISC 2 CD-ROM into the USB DVD-ROM
drive.
Confirm the parameters and click [OK].
15.
When the installation has completed, remove Microsoft Windows Server 2003 R2 DISC 2
CD-ROM from the DVD-ROM drive, and restart the system.
16.
After installation is completed, be sure to execute the tasks described in "Setup of Device
Driver (Normally Installed in Server)" and "Updating the System" of this chapter.
In this case, the [Windows Setup] screen may not be
Advertisement
Table of Contents
