Table of Contents
Advertisement
Advanced
Option
Memory Configuration
PCI Configuration
Peripheral Configuration
Advanced Chipset Control
Boot-time Diagnostic
Screen
Reset Configuration Data
NumLock
Memory/Processor Error
IMPORTANT:
"Yes" for [Reset Configuration Data], because the information on boot
device will be cleared. Select [Exit Saving Changes] to reboot the
system, run BIOS SETUP utility, and provide settings for boot device
order again.
Parameter
Description
–
Displays Memory Configuration
submenu.
–
Displays PCI Configuration
submenu.
–
Displays Peripheral Configuration
submenu.
–
Displays Advanced Chipset Control
submenu.
[Disabled]
When disabled, the BIOS will display
the NEC logo during POST. Press
Enabled
Esc to switch to the POST execution
screen.
[No]
Select "Yes" if you want to clear the
system configuration data during the
Yes
next boot. Automatically reset to
"No" in the next boot.
On
Sets power on Numlock state.
[Off]
[Boot]
If "Halt" is selected, the boot is
stopped when POST error occurs.
Halt
Be sure to take a note of boot priority before selecting
Configuring Your Server 4-7
Your Setting
[
]: Factory-set
Advertisement
Table of Contents
