4-18 Configuring Your Server
Console Redirection Submenu
Option
BIOS Redirection
Port
Baud Rate
Flow Control
Terminal Type
Continue
Redirection after
POST
Remote Console
Reset
Parameter
[Disabled]
Serial Port B
9600
[19.2K]
38.4K
57.6K
115.2K
None
Xon/Xoff
[CTS/RTS]
CTS/RTS+CD
PC ANSI
[VT100+]
VT-UTF8
Disabled
[Enabled]
[Disabled]
Enabled
Description
Specify the address/interrupt of the
serial port to which a remote console
is connected.
Specify the baud rate used for the
interface with successive remote
consoles.
Specify the flow control method.
Specify the type of remote console.
Specify whether to continue console
redirection feature after completion of
POST.
Specify whether to enable or disable
resetting by Escape command (Esc R)
sent from the remote console.
If the server is connected with the
management PC that uses NEC
ESMPRO Manager, this option is
always enabled even if "Disabled" is
specified here.
Your Setting
[
]: Factory-set