Huawei NetCol5000-A050 User Manual page 119

NetCol5000-A050 In-row Air Cooled Smart Cooling
Product
User Manual
Figure 4-86 Cables routed outside the cabinet
Step 2 Set the DIP switches of T/H sensors.
for T/H sensors.
Figure 4-87 Position of the DIP switch on a T/H sensor
Table 4-18 DIP switch setting on a T/H sensor
Locati
on
Air
return
side
Issue 08 (2021-09-17)
NO TE
● The T/H sensors should be 1.5 m above the ground (33 U).
● Each smart cooling product supports a maximum of ten T/H sensors.
● The RS485 ports at both ends of a T/H sensor (33010516) do not distinguish between
the input and output, and they can be connected directly in series.
Display Name
Return air 2
temp/humid
Copyright © Huawei Technologies Co., Ltd.
Table 4-18 shows how to set the DIP switches
Addr DIP Switch Sequence No.
ess
1 2
1 ON OFF
4 Installation
3 4 5
OFF OFF OFF
6
OFF
109