Huawei NetCol5000-A050 User Manual page 272

NetCol5000-A050 In-row Air Cooled Smart Cooling
Product
User Manual
Figure 11-17 Installing a compressor angle valve
Step 10 Apply red glue from the second to the fourth circles of the inner screw thread of
the suction and discharge angle valves. Secure the angle valve nuts and pipe nuts,
as shown by (2) and (3) in
tighten the adjustable nuts using a torque wrench.
Tighten the suction angle valve to a torque of 180 N·m and tighten the discharge
angle valve to a torque of 120 N·m.
Step 11 Install the electric heating belt, remove the connection box cover, and reinstall the
cover after the compressor cables are connected.
Issue 08 (2021-09-17)
NO TICE
Copyright © Huawei Technologies Co., Ltd.
Figure 11-17, using two adjustable wrenches, and
11 Parts Replacement
262