Faq; How Do I Issue A Start/Shutdown Command - Huawei NetCol5000-A050 User Manual

NetCol5000-A050 In-row Air Cooled Smart Cooling
Product
User Manual

12.1 How Do I Issue a Start/Shutdown Command?

You can use the start/shutdown signal over the smart cooling product LCD, ECC
WebUI, or NetEco WebUI, or hardware port to start or shut down the smart
cooling product.
Scenario
If the equipment
is started, issue a
shutdown
command to shut
down the
equipment.
If the equipment
is shut down,
issue a start
command to
start the
equipment.
Issue 08 (2021-09-17)
Operation
Method 1: Set the start/
shutdown signal to
shutdown on the smart
cooling product LCD, ECC
WebUI, or NetEco WebUI.
Method 2: Connect the
remote start/shutdown dry
contacts of the hardware
port.
1. Check that the remote
start/shutdown signal
status of the hardware
port is start.
2. Set the start/shutdown
control signal to start on
the smart cooling
product LCD, ECC
WebUI, or NetEco
WebUI.
Copyright © Huawei Technologies Co., Ltd.
Start/Shutdown
Signal Status -
LCD/ECC/NetEco
WebUI
Shutdown
Start
Start

12 FAQ

12
FAQ
Start/Shutdown
Signal Status -
Hardware Port
Start
Shutdown
Start
292