Unpacking And Acceptance; Installing The Indoor Unit; Checking The Nitrogen Pressure - Huawei NetCol5000-A050 User Manual

NetCol5000-A050 In-row Air Cooled Smart Cooling
Product
User Manual

4.3 Unpacking and Acceptance

Procedure
Step 1 Verify that the cabinet package is intact. If any damage is found, notify the carrier
immediately.
Step 2 Remove the packing materials. Check whether the cabinet exterior is in good
condition and free of collision marks or scratches. If any damage is found, notify
the carrier immediately.
Step 3 Check the type and quantity of fittings against the packing list. If fittings are
missing or inconsistent with those in the packing list, record the information and
contact your local Huawei office immediately.
----End

4.4 Installing the Indoor Unit

4.4.1 Checking the Nitrogen Pressure

Procedure
Step 1 Open the door lock using a key, and open the cabinet rear door.
Step 2 Unfasten the rotating baffle plates, and remove the air filters.
Figure 4-27 Removing air filters
Issue 08 (2021-09-17) Copyright © Huawei Technologies Co., Ltd.
4 Installation
59