Connection - Epson TP1 Manual

3.5 Connection

This section indicates the connection of the Controller and the Teach Pendant.
 Be sure to connect the cables of Controller and Teach Pendant properly. Do not
allow unnecessary strain on the cables. (Do not put heavy objects on the cables.
Do not bend or pull the cables forcibly.) The unnecessary strain on the cables may
result in damage to the cables, disconnection, and/or contact failure. Damaged
cables, disconnection, or contact failure is extremely hazardous and may result in
improper function of the system.
 Make sure that the pins are not bent when connecting the connector. Connecting
the connector with the pin bent may cause malfunction and result in improper
function of the system.
CAUTION
 The connector connected to the end of the cable is a general-purpose type
connector. When connecting the connector, note that the waterproof efficiency and
dustproof efficiency of the connector do not comply with IP65.
 When connecting the Teach Pendant TP1 to the TP port, be careful of the connector
inserting direction (up/down).
function of the system.
TP1 Rev.8
Functions & Installation 3. Installation
It may cause malfunction and result in improper
15