Changing Coordinate Data And Pose Flag; Deleting Point Data - Epson TP1 Manual

2.7.3 Changing Coordinate Data and Pose Flag

(1) Press the <F2> key and move the cursor to [Position: X].
(2) Move the cursor, and set the coordinate data/pose flag.
TIP

(3) Press the <OK> key to apply the memory.

2.7.4 Deleting Point Data

Press the <F3> key to delete the point data.
TP1 Rev.8
To change the orientation flag, point to the orientation flag and press the <F2> key.
Operation 2. TEACH Mode
47