Parameter Read (Batch Read) And Write (Batch Write) - Mitsubishi Electric MELSOFT FR Configurator2 Instruction Manual

Select [All clear] or [Parameter clear] from the [Parameter list (Z)] menu bar, or [All clear] or [Parameter clear] on the toolbar to
perform parameter clear or all parameter clear. Refer to the Instruction Manual of the inverter for availability of parameter clear
and all parameter clear for each parameter.
NOTE
• When parameter clear or all parameter clear were performed from FR Configurator2, the communication parameters are not
cleared. For the parameter details, refer to the Instruction Manual of the inverter or the Instruction Manual of the
communication option.
3.1.3

Parameter read (batch read) and write (batch write)

Parameter read and write can be performed by accessing the inverter parameters. By selecting from among [Batch read],
[Read], [Batch write], or [Write] from the [Parameter list (Z)] menu bar, or by selecting [Batch read], [Read], [Batch write], or
[Write] on the toolbar, the confirmation dialog will be displayed, and batch read, read, batch write, or write will be performed.
The following window is shown when batch read, read, batch write, or write is finished and an error has occurred.
Symbol Name Function/description
Error parameter Shows only the parameters with read errors or write errors.
Read
successful
parameter
A Result display
Write
successful
parameter
Canceled
parameter
B Station tag Shows the read or write target station.
Read
C Result list
Write
D Help Help appears.
E Close Closes the operation window.
A
B
C
D
Shows only the parameters successfully read.
Shows only the parameters successfully written.
Shows only the parameters with read or write canceled.
Shows parameter number, name, initial value, and error number of the reading error
parameters.
Shows parameter number, name, data, and error number of the writing error parameters.
E
1
2
3
4
5
6
7
8
9
10
101
3. FUNCTION
3.1 Parameter list