1.2.3
System configuration
The following devices are required to use FR Configurator2. Set up the system in accordance with the Instruction Manual of
each device.
Example (USB communication / serial communication)
Refer to Connection options on
FR Configurator2
*1
When using a serial port of a personal computer, a commercially available converter is required.
Examples of product available on the market (as of April 2019)
Model: DINV-CABV (with connectors and cable)
Diatrend Corp.
The converter cable cannot connect two or more inverters (the computer and inverter are connected on a 1:1 basis). This is an RS232C-to-RS485
converter-embedded conversion cable. No additional cable or connector is required. Contact a manufacturer for details of the product.
*2
Connection cable
Connector: RJ-45 connector
Cable: Cable in compliance with EIA568 (such as 10BASE-T cable)
*3
USB/RS-485 convert cable
Examples of product available on the market (as of April 2019)
Model: DINV-U4
Diatrend Corp.
Refer to
page 75
When using USB/RS-485 convert cable, use the newest driver software.
For a product details or the newest driver software, contact the cable manufacturer.
*4
Recommended USB cable for computer-inverter connection
MR-J3USBCBL3M (cable length: 3 m)
*5
Communication is available via the PU connector, RS-485 terminals, or USB connector.
*6
Maximum overall length of connection cable: 500 m
*7
Select a USB connector or a serial port (one of the ports 1 to 63) on the communication setting window of FR Configurator2. (Multiple ports cannot
be used at the same time.) One personal computer is connected to one GOT. When using the USB for connecting a GOT, use a dedicated cable,
GT09-C30USB-5P or GT09-C20USB-5P. The GOT2000 series and a personal computer can be connected only via USB or Ethernet.
*8
For the GOT1000 series, an RS-422 communication unit (GT15-RS4-9S) is required. For the compatible version of GOT or details of the RS-422/
485 connection, refer to the GOT1000/GOT2000 Series Connection Manual.
16
1. OUTLINE
1.2 System configuration
page 17
to configure the system.
USB
connector
∗4
USB connector
Converter
∗2
RS-485 cable
connector
USB
connector
for the communication setting with DINV-U4.
Serial
USB connector or
port
serial port
GOT1000/GOT2000
∗1
Converter
communication unit
∗6
Connection cable
RS-485/RS-422
∗5
RS-485
RS-485
terminal
terminal
PU
Inverter
Inverter
Commercially available
∗7
RS-422
∗8
Multidrop link system
RS-485
RS-485
terminal
terminal
Inverter
Inverter
Inverter
printer
RS-485
terminal
Inverter