Mitsubishi Electric MELSOFT FR Configurator2 Instruction Manual page 124

2.
Select [Read from connected inverter]. Set the [Connection type], [Target station], and [Connection setting], and
click [Detection]. After detection, confirm the inverter model in the [Model] field, and click [OK]. The parameters are
converted and the "Source" window closes.
3.
The setting can be changed for some parameters of the source inverter. To change the parameter setting value,
enter the desired value in the setting value field. After the parameters of the source inverter are displayed in the list,
the [Convert...] button in the "Convert" window will be active. Select [Convert...] to display the "Convert" sub window.
4.
Specify the model of the [Target inverter] from the lists in the "Convert" sub window. Click [OK] to convert the
parameters and close the "Convert" sub window.
(When several options are selectable as a target, the "Target option" window appears. Select the target option.)
5.
The converted parameter settings for the target inverter are displayed in the "Convert" window.
Select
[Read from connected inverter]
Click [Detection]
Set the target inverter Set the target option
Select [Convert...]
Select [Reflect...]
1
2
3
4
5
6
7
8
9
10
123
3. FUNCTION
3.3 Convert