Safety Parameter Batch Read And Batch Write - Mitsubishi Electric MELSOFT FR Configurator2 Instruction Manual

3.2.3

Safety parameter batch read and batch write

Safety parameter read and write can be performed by accessing the inverter safety parameters.
 Batch read
Select [Batch read] from the [Safety parameter setting (Z)] menu bar, or [Batch read] on the toolbar to display the confirmation
window and perform batch read.
 Batch write
Select [Batch write] from the [Safety parameter setting (Z)] menu bar, or [Batch write] on the toolbar to display the batch write
confirmation window.
Check that the values in "Setting value" column and "Inverter" column are the same to confirm that batch write has been
performed successfully.
Sym
Name
bol
Date and time of
A
update
B Station number
No.
C Name
Setting value
D Check code
E Help
F Set
G Cancel
Password authentication is required for the first batch write operation. The authentication process is skipped from the second
batch write onwards. (When the safety parameter setting window is closed, authentication will be required again.)
116
3. FUNCTION
3.2 Safety parameter setting
B
C
D
Function/description
Shows the date and time when the data is transmitted to the inverter.
Shows the station numbers selected for batch write.
Shows the safety parameter number.
Shows the safety parameter name.
Shows the safety parameter setting value.
Setting value Shows the values calculated in FR Configurator2.
Inverter Shows the values calculated in the inverter.
Help appears.
Writes all safety parameter setting values to the inverter.
Closes the batch write confirmation window without performing batch write.
E F G
A