Mitsubishi Electric MELSOFT FR Configurator2 Instruction Manual page 195

 Selecting inverters
Symbol
A Checkbox
B Inverter information
C
Connection information
D Version information
E
Status
F Select all installable VFDs
G Select older version of VFDs
H Deselect all VFDs
NOTE
• When selecting a title (VFD Model name, Serial Number, USB location, IP address, or Version) in the "Select VFD" section,
the detected inverters can be sorted in ascending or descending order by column.
 Background colors for selecting inverters
Symbol Color
A Gray
B Red
C Yellow
D Blue
194
3. FUNCTION
3.14 Firmware update
Name
Select the inverters whose firmware are to be updated.
Model names and serial numbers of the connected inverters are displayed.
• USB connection:
• Ethernet connection:
Firmware versions of detected inverters are displayed.
Status for firmware update is displayed.
• Update state
• Error message
• Update complete message and elapsed time
Select all the connected inverters whose firmware are to be updated.
Select the inverters with firmware older than the firmware file among the connected
inverters whose firmware are to be updated.
Clears the checkboxes for the selected inverters.
• The firmware file has not been read.
• Firmware update is not available for the detected inverter.
• The IP address is overlapping with that of another inverter on the network or the personal computer
to execute firmware update.
Fault state due to abnormal operation.
Firmware is being updated.
Firmware update is complete.
Function/description
Connection information of the USB port is displayed.
IP addresses are displayed.
Description