Mitsubishi Electric MELSOFT FR Configurator2 Instruction Manual page 74

Select [New] from the [Project] menu bar or click on the
A
B
C
G
Symbol Name
A Connection setting
B Model setting
Inverter network No.
C
D Auto recognize
E Network setting...
F Clear
G Filter by model...
H Help
I OK
J Cancel
*1 When the FR-A8NCG is installed, enter the same number as the network No.
NOTE
• To use a communication option for the FR-F700-EC/NA inverter equipped with only one option connector, select the
communication option name from the Connector 2 pull-down list of the model setting field in the "System setting" window.
• When the automatic recognition is performed for the FR-F700-EC/NA inverter with a communication option connected to its
option connector, the communication option name is displayed in the Connector 2 field.
on the toolbar to display the "System setting" window.
D E
Select the connection type. Select an option or enter an applicable value in [PC-side port], [COM Port
No.], [Through], [St. No. (GOT)], [Detailed setting], [Protocol], [GOT], and [Programmable controller]
setting fields.
Click the [Auto recognize] button to automatically set the information about the connected inverter. The
model, capacity, and connection option of the inverter can also be selected from the list manually.
Enter the same value as set in Ethernet communication network number
(For FR-A800-E, FR-F800-E, and FR-E800-(SC)E, refer to Pr.1424. For FR-A800-E-R2R, refer to
Pr.1073. For FR-E700-NE, refer to Pr.830.)
Information of the connected inverter can be recognized automatically. (Refer to
Specify the settings for network connection.
Clears the entries in the model setting field.
Shows the window to filter the list of models used for the model selection.
Displays the help window.
Applies the setting to the project and closes the "System setting" window.
Closes the "System setting" window without applying the setting to the project.
F
H
Function/description
I
*1
.
page 74.)
2. PROJECT CREATION
2.1 Project file operation
1
2
3
4
5
6
7
8
9
10
73