Mitsubishi Electric MELSOFT FR Configurator2 Instruction Manual page 111

 Output terminal assignment
Set parameters related to the output terminal assignment.
Symbol
A Terminal
B Signal
C Negative logic
 Analog input terminal calibration
Set parameters related to the analog input terminal calibration.
Symbol
A Calibration method
B Parameter list
110
3. FUNCTION
3.1 Parameter list
A
Name
A terminal name is displayed in this section.
Select the signal to be assigned to the terminal.
Select the checkbox to use negative logic.
Name
Select the calibration method.
When the online connection with an inverter is established, "Bias frequency setting with application
of a voltage (current) to the terminal" and "Gain frequency setting with application of a voltage
(current) to the terminal" are added to the drop-down list.
Change the parameter setting in this field.
B
Function/description
A
B
Function/description
C
A
B