Mitsubishi Electric MELSOFT FR Configurator2 Instruction Manual page 58

Pr. Name
999 Automatic parameter setting
*1 Set Pr.549 = "0" (Mitsubishi inverter (Computer link) protocol).
*2 Pr.551 can be always written regardless of the operation mode.
*3 The read value is always "9999".
NOTE
• Always perform an inverter reset after performing the initial setting of each parameter. After changing the communication-
related parameters, communication cannot be made until the inverter is reset.
Initial
Setting range
value
1 Standard PID setting
2 Extended PID setting
GOT initial setting (PU
10
connector)
GOT initial setting (RS-485
11
terminals)
GOT initial setting (PU
*3
12
9999
connector)
GOT initial setting
13 Automatic setting (RS-485
terminals)
20 50 Hz rated frequency
21 60 Hz rated frequency
9999 No action
Description
GOT side model
selection: FR 500/700/
800, sensorless servo
GOT side model
selection: FR 800
1. OUTLINE
1.4 Connection and parameter setting
1
2
3
4
5
6
7
8
9
10
57