Chapter 20 Hardware Reset Function - Mitsubishi Electric MELSEC iQ-R Series User Manual

20
HARDWARE RESET FUNCTION
This function resets hardware.
Reset a system when this product is in the error status such as a hardware error.
Preparation
Perform the Windows shutdown function to shutdown Windows.
For details on the Windows shutdown function, refer to the following:
Page 193 Windows SHUTDOWN FUNCTION
Execution of reset
The following shows the procedure for resetting hardware.
Operating procedure
1.
Hold the HARD RESET/OS RESET switch on the HARD RESET position (for 1.0 second or longer).
The hardware is reset.
2.
Release the HARD RESET/OS RESET switch and put it back to the center position.
Precautions
Ensure to reset the hardware after shutting down Windows.
Otherwise, Windows may not start normally, data in a user drive may be corrupted, or a file system error may occur.
20 HARDWARE RESET FUNCTION
20
187