Mitsubishi Electric MELSEC iQ-R Series User Manual page 200

Y output status before change
Factor to determine
the Y output status
User program
Stop error occurred
Output mode setting when the Y output status is changed from Y STOP to Y OUT
When the Y output status is changed from the Y OUT or other state to the Y STOP state, this product saves the output (Y)
status and turns OFF all outputs (Y).
In this setting, whether to output the output (Y) status just before the status is changed to the Y STOP state or to clear all the
outputs (Y) can be selected.
[CPU Parameter]  [Operation Related Setting]  [Output Mode Setting at Y STOP to Y OUT]
Window
Displayed items
Item
Output Mode at Y STOP to Y OUT
24 Y OUTPUT CONTROL FUNCTION
198
Y output status Switch status
Y STOP Y STOP
PAUSE Y STOP
(The actual operating status
is Y STOP.)
Y OUT Y STOP
(The actual operating status
is Y STOP.)
Y STOP Y OUT
PAUSE Y OUT
Y OUT Y OUT
Y STOP Y STOP
Y STOP Y OUT
Description
Set 'output the output (Y) status before Y STOP' and 'clear the
output (Y)' when the status is switched from Y STOP to Y OUT.
Y output status after change
BUS RESET/Y STOP/Y OUT switch
Y OUT Y STOP
 

PAUSE
Y OUT 
 

Y STOP
 Y STOP
 
(Error STOP)
 
(Error STOP)
Setting range
• Output the Output
(Y) Status before
Y STOP
• Clear the Output
(Y)
Stop error
occurred




Y STOP
Y STOP


Default
Output the Output
(Y) Status before Y
STOP