Mitsubishi Electric MELSEC iQ-R Series User Manual page 97

■Network Configuration
Settings for a network are displayed.
Item
LAN Controller 1
LAN Controller 2
Precautions
After changing these settings, configure the Windows network settings again.
■Audio Configuration
A setting for an audio is displayed.
Item
Audio Controller
■I/O Device Configuration
A setting for a serial port is displayed.
Item
Serial Port
■Event Logging
Settings for event logs are displayed.
Item
Event Log Capacity
View Event Log
Clears All Event Logs
Event Logging
Description
Set whether to enable the Ethernet controller 1.
• Disabled: The Ethernet controller 1 is disabled.
• Enabled: The Ethernet controller 1 is enabled. (Default)
Set whether to enable the Ethernet controller 2.
• Disabled: The Ethernet controller 2 is disabled.
• Enabled: The Ethernet controller 2 is enabled. (Default)
Description
Set whether to enable an audio controller.
• Disabled: An audio controller is disabled.
• Enabled: An audio controller is enabled. (Default)
Description
Set whether to enable a serial port.
• Disabled: A serial port is disabled.
• Enabled: A serial port is enabled. (Default)
Description
The status of a log area is displayed.
• Full: No space is left in a log area.
• Space Available: New logs can be recorded.
Log data is displayed.
Log data is deleted by restarting this product with this item set to "Yes."
This item is set back to "No" after the restart.
• No: Log data is not deleted. (Default)
• Yes: Log data is deleted.
Set whether to record event logs.
• Disabled: Event logs are not recorded.
• Enabled: Event logs are recorded. (Default)
9 MAINTENANCE AND INSPECTION
9.3 BIOS Setup
9
95