Folder Configuration; Memory Configuration - Mitsubishi Electric MELSEC iQ-R Series User Manual

Folder configuration

The following table shows the folder configuration of this product.
Drive name Folder name
C: WinCPU
Windows
Folder configuration of pre-installed applications and included products
The following table shows the folder configuration of pre-installed applications and included products.
Drive name Folder name
C: WinCPU
Edgecross
Program Files
(x86)

Memory configuration

This product contains the area (data memory) for storing parameter files.
Data can be written to/read from the data memory only with CW Configurator.
*1 The drive name "Data Memory" is displayed in the "Event History" screen of CW Configurator.
Precautions
The data memory cannot be referred to from Windows.
Files to be stored in the data memory
The following shows the files to be stored in the data memory.
File name
SYSTEM.PRM
CPU.PRM
UNIT.PRM
*1
UEXmmmnn.PRM
*2
SLAVEmmmnnnxxxx.NSP
*1 The 'mmm' represents the start I/O number of a module (the first three digits in four-digit hexadecimal representation). Note that the
number of a CPU module is fixed to 3FFH. In addition, the 'nn' represents the sequential serial number (two-digit hexadecimal
representation) of module extended parameters of each module.
*2 The 'mmm' represents the start I/O number of the master station on CC-Link IE TSN (the first three digits in four-digit hexadecimal
representation), the 'nnn' represents the number of modules set in the network configuration settings (in three-digit hexadecimal
representation), and the 'xxxx' represents the sequential serial number of the parameter (in four-digit hexadecimal representation).

INCLUDE
LIB
Drivers
RuntimeLibrary
Edgecross
DataCollector
MELSOFT Easysocket
e-Manual Viewer
RCCPU
Description
System parameter
CPU parameter
Module parameter
Module extended parameter
CC-Link IE TSN slave station parameter file
Description
Folder to store product related files
Folder to store the header files of MELSEC data link functions and C Controller
module dedicated functions
Folder to store the library files of MELSEC data link functions and C Controller
module dedicated functions
Windows system folder
Description
Folder to store the installer of a driver installed on this product
Folder to store the installer of Microsoft Visual C++ Runtime Library
Folder to store the installer of Edgecross Basic Software
Folder to store the installer of SLMP Data Collector
Folder to store installed Edgecross Basic Software and SLMP Data Collector
Easysocket
e-Manual Viewer
CW Configurator
*1
6 SYSTEM CONFIGURATION
6.2 Software Configuration
6
65