Restrictions - Mitsubishi Electric MELSEC iQ-R Series User Manual

Restrictions

The following shows the restrictions for Windows.
Unified Write Filter
Windows Unified Write Filter is not available in this product.
To turn the power of this product OFF or reset the hardware, ensure to shut down Windows. (Page 57 POWER OFF AND
RESET)

Setting of Intel Graphics Power Plan
Do not change the setting of Intel Graphics Power Plan from Maximum Battery Life.
Changing the setting from Maximum Battery Life may result in a temperature error in a CPU module due to increase in the
GPU power consumption.
Power saving function of Windows
The 'Sleep' and 'Hybernate' options of the power saving functions and the 'Turn off the display' option of the plan settings of
power options on Windows are not supported.
Therefore, the 'Sleep' and 'Hibernate' options as well as the 'Turn off the display' option are disabled on Windows installed on
this product.
■Setting the power saving function of Windows
In this product, the following group policy is changed from the default value.
Group policy
Turn off the display (plugged in)
Do not change the above setting. Otherwise this product may not operate properly.
By this setting, the message 'Some settings are managed by your system administrator.' is displayed in the "Edit Plan
Settings" screen of power options. In addition, the message 'Some settings are hidden or managed by your organization.' is
displayed in the "Power and sleep settings" screen.
Update of a driver
Updating a driver installed on Windows may result in malfunction of this product.
If updating a driver, perform a test run of the system of this product and check that there is no problem with its operation
before starting the system.
Task scheduler settings
Do not delete or disable any tasks created by "MITSUBISHI ELECTRIC CORPORATION" from Windows task scheduler.
Otherwise, this product may not operate normally.
Enabling an FTP server
To access an FTP server of this product from a target device (an FTP client), do not use an FTP access function with the
Windows standard explorer. Doing so may cause that the file update time on the explorer does not match the time of this
product, or that the file is displayed in the previous state even after it is overwritten.
Setting after change
Status: Enabled
Option: 0 seconds
4 PROCEDURES BEFORE OPERATION
4.3 Setting up Windows
4
51