Windows Recovery; Creating Recovery Data - Mitsubishi Electric MELSEC iQ-R Series User Manual

9.4

Windows Recovery

This section shows the procedures for creating recovery data for Windows and for recovering Windows by using the recovery
data.
To recover Windows, both a recovery drive and a system image are required.
Make sure to create a recovery drive and a system image.
Precautions
When Windows is recovered by using a Windows 10 function, services necessary for this product and pre-installed
applications may be deleted; therefore, the functions of this product cannot be used. Do not recover Windows by using the
following function of Windows 10.
Windows Start  [Settings]  [Update & Security]  [Recovery]  [Reset this PC]

Creating recovery data

The following explains the methods for creating recovery data (recovery drive and system image).
Precautions
After creating Windows recovery data, hold the FUNCTION/SHUTDOWN switch on the SHUTDOWN position to shut down
Windows. Then, turn the power of this product OFF.
Recovery drive
The procedure for creating a recovery drive is as follows.
It takes approximately three hours to create a recovery drive.
1.
Connect a USB memory (with a capacity of 16 GB or more) to this product.
2.
Perform [Recovery Drive].
Windows Start  [Windows Administrative Tools]  [Recovery Drive]
3.
Check that the checkbox of "Back up system files to the recovery drive." is selected, and click the [Next] button.
4.
Check that the connected USB memory is displayed as an available drive, and create a recovery drive.
9 MAINTENANCE AND INSPECTION
9.4 Windows Recovery
9
99