Cfast Card; Extension Base Unit - Mitsubishi Electric MELSEC iQ-R Series User Manual

CFast card

The following shows the considerations for using a CFast card.
Available CFast cards
Only the CFast cards described in the following can be used for this product.
MELSEC iQ-R Module Configuration Manual
Technical bulletin No. FA-D-0023
Do not use the other CFast cards.
Note the following when using a CFast card.
• Turn OFF the power of this product before inserting or removing a CFast card.
• Turning OFF the power of this product, resetting the hardware, or restarting Windows forcibly while accessing a CFast card
may cause data corruption in a CFast card or a file system error. Perform these operations after stopping access to the
CFast card.
CFast card life
For the number of writable times of a CFast card, check the manual provided with the CFast card. When the number of
writable times is exceeded, replace the CFast card. (Page 81 CFast Card)

Extension base unit

In a configuration that an RQ extension base unit or an extension base unit is connected to the main base unit on which this
product is mounted, when turning OFF the power of a base unit other than the main base unit, the hardware of this product
will be reset.
Make sure to shut down Windows in this product before turning OFF the power of the base units. (Page 57 Shutting down
Windows)
Otherwise, Windows may not start normally, data in a user drive may be corrupted, or a file system error may occur.
6 SYSTEM CONFIGURATION
68
6.4 Considerations for Configuring a System