Advertisement
Position and Rotation Adjustment
6.3
Setting a Position/Rotation Adjustment Checker
3.
Select Hor. Det. Rot. Adj.
The setting menu for position adjustment using gray edge
detection is displayed. Use Select Camera to select the
camera, and Delete Checker to delete the checker as
required.
[1] POS. ROT. ADJ.
No. 1
Gray Edge :Pos. Adj.
1.
2.
3.
4.
5.
6.
1.
Select Camera
Select either the camera A or camera B image for operating the Position
Adjustment checker.
2.
Checker 1
3.
Checker 2
Use these to create the checkers and set items such as the scan conditions.
4.
Base
Execute a test to register the base point for adjustment.
5.
Pos.Rot. Adj. Group
Set which checker is to be used for adjustment in the case that you are using
multiple settings for position and rotation adjustment. Select a group number.
Refer to Position Adjustment Groups (page 6 − 31) for details.
6.
Delete Checker
Use this to delete a checker.
In the case that you have created both vertical and horizontal checkers, select
which one you want to delete.
Note
If you delete a Position Adjustment checker, the inspection
results for all checkers that follow the deleted checker are
cleared.
6 − 16
Jud:NG
Select Camera
Checker 1
Checker 2
Base Pos.
(−−−−−, −−−−−, −−−−−)
Pos. Rot. Adj. Group
Delete Checker
B
Empty
Empty
0
OCR Type A230
Advertisement
