Advertisement
Inspection Results and Output
13.4
Judgment Output
13.4.2
Creating a Judgment Programme
In the judgment condition program example described here, JD01 goes on if the
Character Verification No. 1 checker judgment result is OK.
Procedure:
1.
Align the cursor to select the register number for the calculation programme
you are going to create and press ENTER.
[9] JUDGMENT
JD01=
JD02=
JD03=
JD01=
JD04=
JD05=
JD06=
JD07=
JD08=
2.
From the state shown in step 1 above, press ENTER again. A sub−window is
displayed for selection of parameters to be input.
Note
This cannot be selected if no PA, CR, CH, SM, LD, GE, GW, CA
or OCA, JR, JD checker data exists.
3.
Next, select the parameters to be referenced.
JD01=CH0100
Checker numbers cannot be selected if the checker does not exist.
13 − 24
Program
Jud.
−−
−−
−−
−−
−−
−−
−−
−−
OCR Type A230
Advertisement
