Advertisement
Environment and Product Type
5.3
Product Types
5.3.6
Switching Between Product Types
Procedure:
1.
Enter the type number for the type you want to switch to and press C , and the
type is switched and you return to the main menu.
Notes
If you selected Yes in the Environment menu for the data
change message (Display Message), a message saying, "Data
changed, but not saved." is displayed on the screen when you
have finished switching to a different type.
If you selected No, the above message is not displayed. The
message is also not displayed if you set No.1 as the start type
number.
When you switch types, the execution results and trap setup
conditions are cleared for all of the checkers. However,
specific substitution results are not cleared.
In addition, if you select a type number that has not been set
up, the type cannot be switched. Select a type number that
has been set up and switch the type.
5.3.7
Copying a Product Type
Procedure:
1.
Set a copy destination for the type number.
When changing the capture camera, the saved image data, including those
that are locked, are all deleted.
2.
Select and confirm Copy Type.
3.
Set the type number copy source.
4.
Enter YES to copy when "Execute?" is displayed. Enter NO to go back without
copying.
5 − 18
OCR Type A230
Advertisement
