Advertisement
OCR Type A230
4.
After entry is complete, press C.
A confirmation message asks if you wish to register the changes you have
made. To register the changes press Yes. To discard the information input
select No.
To cancel, press C.
5.
Set the upper and lower limit values. Select Next on the sub−window to move
the cursor to the Max field.
Max
0000000100
Program
CA01=GE02011−GE01011
CA01=GE02011−GE01011
CA04=
Data Bit (CA01−CA04)
Next
PA CH SM LD GE GW
CA OCA QS CV Num. Ope.
Set the maximum and minimum values.
Max
100
Program
CA01=GE02011−GE01011
CA02=
CA03=
CA04=
Data Bit (CA01−CA04)
To Revise a Programme During Input
Procedure:
1.
Set the numerical calculation programme register No., use the cursor lever to
move the highlight cursor to the incorrect item and press B to delete the item.
CA01=GE02011−GE01011
2.
To add to a programme, characters are inserted in front of the highlight cursor.
CA01=GE02011+GE01011
Min
Result
0
0
Result
Jud.
0
OK
−−−−−−
−−
8bit, 16bit, 32bit
Min
Result
50
0
Result
Jud.
0
OK
−−−−−−
−−
−−−−−−
−−
−−−−−−
−−
8bit, 16bit, 32bit
Inspection Results and Output
13.3 Numerical Calculation
13 − 15
Advertisement
