Advertisement
Character Recognition: Dictionary and Character Recognition Function
7.5
Recognizing Character
3.
Setting Judgment Character String
Set the condition of the characters (string) to be recognized for judging to be OK.
When the judgement is NOT required, set the initial settings ("__" set for 16
characters ). The judgment character string can be changed by inputting the serial
command from the external device.
1.
Select "3. String Judgment".
→ The judgment character string setting screen is displayed.
As shown above, with "__" set for the maximum of 16 characters, the overall
judgment result or individual judgment result for each character will be OK
regardless of whether characters were recognized or not and regardless of
what those characters were if recognized.
If you intend to only output the recognized characters from the A230 and not
to specify a judgment character string, then set the judgment character string
in this way.
Note
Characters cannot be recognized when the judgment character
string is made blank.
2.
Highlight Del and press <ENTER> to delete the displayed symbol "__".
You cannot move the cursor that is on the judgment character string.
7 − 20
OCR Type A230
Advertisement
