Advertisement
Position and Rotation Adjustment
6.3
Setting a Position/Rotation Adjustment Checker
5.
Set the base position.
Select Base, and press the A (Test) key to display the
current detection coordinates, detection angles and
correlation values (a maximum of five).
[1] POS. ROT. ADJ.
No. 1
Matching:One Chkr. Pos.
3.
No
1
2
3
4
5
A:Test
Select the appropriate position from the table and press the
ENTER key. The coordinates that you select are registered
as the base position. When you return to the setting menu,
the adjustment amounts (∆X, ∆Y and ∆θ) are displayed at the
top right of the screen.
Press the B key to check the base position using the image.
Press the C key to cancel the base position.
Refer to page 6 − 10 Setting the base position for details.
6 − 26
Base Position
Co. X
Co. Y
Theta
53.1
308.1
0.0
B:Pos. Dsp.
C:Esc.
Corre.
0.89
OCR Type A230
Advertisement
