Advertisement
OCR Type A230
15.2 Executing a Group Move
Group move is a function for moving a group of already specified checkers that have
the same position and rotation adjuster number.
Procedure:
1.
Select GROUP MOVE from the Checker menu.
[7] GROUP MOVE
No.
0
1. CHAR. VERIF.
2. SMART MATCHING
3. LEAD INSPECTION
4. GRAY EDGE DETECTION
5. GRAY WINDOW
A:Get Image B:Change Im. C:Esc.
Group No.
Set the position and rotation adjustment group number for the checkers to be
moved as a group.
1 to 8 :
Type of checker
Select the types of checkers for group move.
Group move only applies to checkers of a type specified as Yes.
Group move does not apply to checkers of a type specified as No.
2.
If necessary, press A to capture an image.
3.
Select the position and rotation adjustment group number for the checkers to
be moved.
The number entered represents the appropriate position and rotation
adjustment group.
The checkers corresponding to the number entered are displayed brightly.
Note
Position and rotation adjusters cannot be move by Group Move.
4.
Select the types of checkers to be moved.
Set independently for each type of checker whether or not it should be
included in a group move.
The types of checkers included in a group move are displayed brightly.
5.
Press A to start the group move.
Images with rotation angle 0 are displayed during a group move. Use the
cursor lever to move the checkers to the required position.
Yes
Yes
Yes
Yes
Yes
0: Move all checkers with position and rotation
adjustment group set to "0".
Move all checkers adjusted by the specified
position and rotation adjustment group number.
Useful Functions
15.2 Executing a Group Move
15 − 7
Advertisement
