Advertisement
Lead Inspection Checker
10.1
About Lead Inspection Checkers
10.1.1
Lead Inspection Setting Menu
[4] LEAD INSPECTION Detected:NG Cnt. : 0
No. 1
1. Select Camera
2. Checker Setting
3. Detect Judgment
4. Width Judgment
5. Pitch Judgment
6. Pos. Rot. Adj. Group
7. Result
8. Copy Checker
9. Delete Checker
A:Test
B:Image
Number (Checker No.):
The number of the checker being created.
1.
Select Camera
Select which camera screen (A or B) to operate the lead Inspection checker from.
2.
Checker Setting
Settings relating to the lead inspection method.
3.
Detect Judgment
Specify the number of leads for an OK result in the case that you will perform
judgment based on the number of leads.
4.
Width Judgment
Specify the lead width for an OK result in the case that you will perform judgment
based on the lead width.
5.
Pitch Judgment
Specify the Pitch for an OK result in the case that you will perform judgment based
on the pitch.
6.
Pos.Rot. Adj. Group
Select a Position or Rotation Adjustment checker number in the case that you will
perform position or rotation adjustment.
7.
Result
Displays data about the detected leads.
8.
Copy Checker
When creating a new checker it is possible to copy settings from existing checkers
to save time.
9.
Delete Checker
Use to delete checkers.
10 − 4
Width: OK Pitch:OK
A
128
<510.9, 0.0>
<510.9, 0.0>
0
C:Esc.
Result
OCR Type A230
Advertisement
